Macbook Pro A1990 820-01326 Short on G3H Dead Liquid Damaged | Macbook repairs New Zealand

 Macbook pro 15.6 A1990 water damaged. Board number 820-01326.

Macbook repair experts AppleFix 125 ward street Hamilton New Zealand Call 078394111 mail in repair instructions read here https://applefix.co.nz/send-your-device/ A general guide to macbook a1990 repair Repairing a shorted G3H issue on a MacBook A1990 involves troubleshooting and locating the component or area that is causing the short. This process requires a good understanding of electronics, proper tools, and caution. If you're not comfortable with electronics repair or don't have experience with MacBook repairs, it's strongly advised to seek professional assistance, as attempting repairs without proper expertise can lead to further damage. Here's a general guide for informational purposes only. Note that specifics can vary based on the nature of the short and the MacBook model: Tools and Materials Needed: Multimeter. Schematics and boardview files for MacBook A1990. Isopropyl alcohol and a brush. Thermal camera (optional). Soldering iron and soldering equipment. ESD-safe workspace and wrist strap. Procedure: Prepare Your Workspace: Ensure you're working in an electrostatic discharge (ESD)-safe environment to prevent damage to electronic components. Disconnect Power: Power off your MacBook and disconnect it from any power source. Disassemble the MacBook: Follow a disassembly guide specific to your MacBook model to expose the logic board. Inspect for Visible Damage: Visually inspect the logic board for any signs of physical damage, burnt components, or liquid damage. Clean the board with isopropyl alcohol and a brush. Check for Short Circuits: Using a multimeter in continuity mode, check for short circuits on the main power rails, especially G3H. Compare your readings to the expected values from the schematics. Identify Components: Use the schematics and boardview files to identify the location of the G3H power rail and the components connected to it. Thermal Imaging (Optional): Use a thermal camera to identify hotspots on the logic board. Overheating components may indicate the area of the short. Isolate Components: Remove or lift components connected to the G3H power rail one by one and check for changes in the multimeter readings. Inspect the Battery: The battery could be a source of a short. Disconnect and inspect the battery, checking for any signs of damage. Soldering Work: If you identify a shorted component, carefully desolder it and replace it with a new one. Pay attention to proper soldering techniques. Test After Each Step: Power on the MacBook after each step to check if the short has been resolved. Reassemble and Test: Once you've identified and resolved the issue, reassemble the MacBook and perform a thorough test to ensure proper functionality. Remember, MacBook logic board repairs, especially dealing with shorts, can be intricate and challenging. If you're not confident in your skills, it's advisable to seek the help of a professional technician or a reputable repair service. AppleFix Hamilton are experts in macbook repairs call 078394111 or visit 125 ward street hamilton new zealand

watch full video here https://youtu.be/tel5-Ia9qgY?si=0rpG6XafEJA53PsW

iphone 8 plus no sound on calls | Speaker button grayed out | 338S00248 iphone repair experts hamilton new zealand

If you're experiencing issues with no sound from the ear speaker and loudspeaker on your iPhone 8 Plus, and the speaker button is grayed out, it could be due to a variety of reasons, ranging from software issues to hardware malfunctions. Here are some steps you can take to troubleshoot and potentially resolve the problem:

 

Before you bring it to applefix Hamilton new zealand try below steps

 

1. Restart Your iPhone:

Sometimes, a simple restart can resolve software glitches. Turn off your iPhone and then turn it back on.

2. Check Silent Mode and Volume Settings:

Ensure that your iPhone is not in silent mode check the silent switch on the side and that the volume is turned up.

3. Update iOS:

Make sure your iPhone is running the latest version of iOS. Software updates can include bug fixes that might address audio issues.

4. Reset All Settings:

Go to Settings  General  Reset  Reset All Settings. This won't delete your data, but it will reset system settings like Wi-Fi passwords and wallpaper. Check if the issue persists after the reset.

5. Check for Software Issues:

Sometimes, third-party apps or software glitches can cause audio problems. Try playing sound through different apps to see if the issue is app-specific.

6. Check for Water Damage:

If your iPhone has been exposed to water or moisture, it could be affecting the speakers. Check for any signs of water damage, and if present, consider drying your phone or seeking professional assistance.

7. Inspect the Audio Port:

Ensure that the audio port is not clogged with debris. Use a small, soft brush or compressed air to clean it.

8. Perform a Hard Reset:

Perform a hard reset by pressing and holding the power button and volume down button simultaneously until you see the Apple logo. This can help resolve temporary software issues.

9. Check Audio Settings:

Go to Settings  Sounds & Haptics and adjust the Ringer and Alerts volume. Make sure the Change with Buttons option is enabled.

10. Restore iPhone:

If none of the above steps work, you may need to restore your iPhone to factory settings using iTunes. Make sure to back up your data before doing this.

11. Hardware Inspection:

If the issue persists after trying all software-related solutions, there may be a hardware problem. In this case, it's advisable to contact Apple Support or visit an Apple Authorized Service Provider for further assistance.

 

iphone 8 plus no sound from era speaker and loud speaker and speaker button is grayed out. iphone 8 plus audio codec ic 338S00248  u4700 replacement

applefix hamilton new zeland iphone repair in new zealand call 078394111 125 ward street hamilton

mail in device read instructions here https://applefix.co.nz/send-your-device/

logic board repair courses in new zealand https://applefix.co.nz/logicboard-repair-course/

lcd refurbish course in new zealand

https://applefix.co.nz/lcd-refurbish-course/

Xbox one S digital hdmi port repair | Xbox Repair Hamilton New Zealand applefix call 078394111

Xbox one S digital broken hdmi port replacement. AppleFix Hamilton 125 ward street are xbox repair experts. Call 078394111

If you dont live in hamilton mail in your device read instructions here https://applefix.co.nz/send-your-device/

 

logicboard repair courses in new Zealand

https://applefix.co.nz/logicboard-rep...

 

lcd refurbish course in New Zealand

https://applefix.co.nz/lcd-refurbish-...

 

Repairing or replacing an HDMI port on an Xbox One S Digital Edition requires technical skill and should be approached with caution. If you are not comfortable with electronics and soldering, it's recommended to seek professional help or contact Microsoft for support. If you have the necessary skills, here is a general guide to replacing the HDMI port: For a professional xbox one s hdmi port repair bring it to applefix 125 ward street Hamilton New Zealand or call 078394111

 

Note: This information is for educational purposes only, and I am not responsible for any damage that may occur during the repair process. Proceed at your own risk.

 

Tools and Materials Needed:

Replacement HDMI port.

Soldering iron and solder.

Desoldering wick or solder sucker.

Precision screwdrivers.

Opening tools.

ESD-safe workplace and wrist strap.

Steps:

Prepare Your Workspace:

 

Ensure you're working in an electrostatic discharge (ESD)-safe environment to prevent damage to electronic components.

Disconnect Power:

 

Power off and unplug your Xbox One S Digital Edition.

Disassemble the Xbox:

 

Follow a disassembly guide specific to your Xbox One S Digital Edition model. This usually involves removing the case and exposing the internal components.

Locate the HDMI Port:

 

Identify the HDMI port on the Xbox One S Digital Edition's motherboard.

Desolder the Damaged HDMI Port:

 

Use a soldering iron and desoldering wick or solder sucker to carefully remove the solder from the existing HDMI port's connections on the motherboard.

Remove the Old HDMI Port:

 

Gently lift and remove the damaged HDMI port from the motherboard.

Solder the New HDMI Port:

 

Align the replacement HDMI port with the solder pads on the motherboard and solder it in place. Be precise and avoid creating solder bridges between connections.

Inspect Your Work:

 

Examine the solder joints to ensure they are clean and free of defects. Check for any accidental solder bridges or cold solder joints.

Reassemble the Xbox:

 

Put the Xbox back together in the reverse order of disassembly.

Test the HDMI Port:

 

Power on the Xbox and test the HDMI port with a known-working cable and display. Ensure there is a proper connection and that audio and video signals are transmitted correctly.

If you are not confident in your soldering skills or if you encounter difficulties during the process, it's strongly recommended to seek professional help or contact Microsoft for repair options. Additionally, be aware that attempting to repair your Xbox One S Digital Edition on your own may void any existing warranties.

Power & volume button not working | on off button repair | phone repairs hamilton new zealand

Power & volume button not working | on off button repair | phone repairs experts | AppleFix |

 

power button and volume button not working. How to repair flex cable. mobile phone repairs in hamilton New Zealand. Oppo repairs, Huawei repairs, Nokia , samsung or any other brand.

Repairing or fixing the power on/off button on a mobile phone can be a complex task, as it often involves disassembling the phone and working with delicate components. If you're experiencing issues with your phone's power button, consider the following steps:

 

Basic Troubleshooting:

 

Ensure that the issue is with the power button and not a software problem. Sometimes, a simple restart or a software update can resolve power-related issues.

Clean the power button: Dust and debris can sometimes cause power buttons to become unresponsive. Carefully clean the button using compressed air or a small brush.

Restart Your Phone:

 

If your phone is still functional, try restarting it through the software settings, if possible. This can temporarily solve the problem if it's a software issue.

Check for Physical Damage:

 

Examine the power button and its surroundings for physical damage or debris that might be obstructing its operation.

Use Assistive Features:

 

Some mobile devices have built-in accessibility features that allow you to control power-related functions through the touchscreen. Check if your phone has this option.

Repairing or Replacing the Power Button (Advanced):

 

If you have experience with electronics repair and are comfortable disassembling your phone, you can attempt to repair or replace the power button.

You'll need the appropriate tools, a replacement power button, and a guide or tutorial specific to your phone model.

Be extremely cautious when disassembling your phone, as it can be easy to damage other components.

If you're not experienced with electronics repair, it's strongly recommended to seek professional repair services to avoid causing further damage to your phone.

Professional Repair Service:

 

The safest and most reliable option for fixing a power button issue is to take your phone to a professional repair technician like applefix in hamilton new zealand @. 125 ward street hamilton They have the expertise, tools, and replacement parts needed to address the problem effectively.

Contact the Manufacturer:

 

If your phone is under warranty, consider reaching out to the manufacturer's customer support for assistance and warranty repair options.

Remember that attempting a DIY repair on your phone may void your warranty or cause additional damage. It's essential to exercise caution and consider your level of expertise and the value of your device when deciding how to address a power button issue. If in doubt, consult with a professional technician or the phone manufacturer for guidance.