Nintendo switch repair experts in hamilton New zealand Call 078394111
or visit 125 ward street hamilton www.applefix.co.nz
Mail in device read instructions here
https://applefix.co.nz/send-your-device/
logicboard repair courses
https://applefix.co.nz/logicboard-repair-course/
lcd refurbish courses https://applefix.co.nz/lcd-refurbish-course/
How to replace Nintendo switch charging port? read general guide below
Replacing the charging port on a Nintendo Switch can be a bit intricate
and requires some technical skill. Here's a general guide on how you might go
about it:
Tools Required:
Tri-wing screwdriver
Phillips head screwdriver
Tweezers
Plastic pry tool
Replacement USB-C charging port
Heat gun
Soldering Iron
Steps:
Prepare Your Workspace:
Find a clean, well-lit area to work in.
Lay down a soft cloth to prevent scratches to the screen or back of the
Switch.
Power Down the Switch:
Ensure the Nintendo Switch is completely powered off before beginning
any repairs.
Remove the Back Panel:
Use the tri-wing screwdriver to remove the screws from the back panel.
Gently pry off the back panel using a plastic pry tool. Be careful not
to damage the plastic clips holding it in place.
Disconnect the Battery:
Inside, you'll find the battery connector. Use a plastic pry tool to
disconnect it. This is important for safety reasons.
Locate and Remove the Charging Port:
The charging port is typically located at the bottom of the Switch.
Remove any screws securing the charging port in place.
Carefully disconnect any ribbons or cables attached to the charging
port.
Replace the Charging Port:
Take your new USB-C charging port and connect any ribbons or cables to
it.
Secure the charging port in place with the screws you removed earlier.
Reconnect the Battery:
Carefully reconnect the battery connector.
Replace the Back Panel:
Snap the back panel back into place, ensuring all clips are secured.
Replace the screws using the tri-wing screwdriver.
Test the Switch:
Before fully reassembling the Switch, it's wise to test if the new
charging port is working properly.
Plug in the charger and ensure the Switch recognizes it and begins
charging.
Reassemble the Switch:
Once you're sure the charging port is working, you can replace any
remaining screws and fully reassemble the Switch.
Tips:
Be Patient: Take your time and don't rush the process. Rushing can lead
to mistakes or damage to the device.
Keep Track of Screws: Use a magnetic mat or tray to keep track of
screws and small parts during disassembly.
Watch Tutorials: If possible, watch video tutorials or read detailed
guides specific to Nintendo Switch charging port replacements for visual
guidance.
If you're uncomfortable performing this repair yourself, it might be
best to seek assistance from a professional technician or repair service.
