Samsung S24 Ultra Broken Screen replacement Step by Step
Guide | Samsung Repair In Hamilton New Zealand Call 078394111 or visit 937
Victoria Street hamilton @ AppleFix 7 Tech engineers
Replacing the screen on a Samsung Galaxy S24 Ultra can be
complex, and it's recommended to proceed with caution. Here’s a general guide
to help you through the process:
Replacing the screen on a Samsung Galaxy S24 Ultra can be complex, and
it's recommended to proceed with caution. Here’s a general guide to help you
through the process:
Tools Needed
Heat gun or hair dryer
Suction cup tool
Plastic spudger or opening tool
Phillips screwdriver (small)
Tweezers
Replacement screen
Adhesive strips (if needed)
Anti-static wrist strap (optional but recommended)
Step-by-Step Guide
1. Power Off the Device
Turn off your Galaxy S24 Ultra to avoid any electrical damage.
2. Remove the SIM Card Tray
Use a SIM eject tool to remove the SIM card tray.
3. Heat the Edges
Use a heat gun or hair dryer to warm up the edges of the phone. This
helps soften the adhesive holding the screen in place.
4. Create a Gap
Attach a suction cup to the screen. Gently pull to create a small gap
between the screen and the frame. Use a plastic spudger to insert into the gap.
5. Pry Open the Screen
Carefully slide the spudger around the edges to detach the adhesive. Be
cautious of any cables or components inside.
6. Disconnect the Battery
Once the screen is slightly lifted, locate the battery connector. Use a
Phillips screwdriver to remove the screws holding the cover in place, then
gently disconnect the battery.
7. Remove the Broken Screen
Disconnect the screen by unscrewing the necessary screws and using a
spudger to lift the connector. Carefully remove the broken screen from the
device.
8. Install the New Screen
Place the new screen into position. Connect the screen cable and ensure
it's secured.
9. Reconnect the Battery
Reconnect the battery, ensuring the connection is firm.
10. Test the Device
Before sealing everything back up, power on the device to test the new
screen. Make sure touch functions and display quality are working properly.
11. Seal the Device
If everything is functioning, proceed to reattach the screen. Use
adhesive strips to secure it, ensuring a tight fit.
12. Reinsert the SIM Card Tray
Finally, reinsert the SIM card tray and power on your device.
Tips
Be Patient: The process can be delicate; take your time.
Stay Grounded: Use an anti-static wrist strap to prevent damage to
components.
Consider Professional Help: If you’re uncomfortable with any step, it
might be best to take it to a professional repair service.
Warnings
Opening your device may void any warranty.
Be aware of your local laws regarding device repair.
If you're unsure about any part of the process, consulting a
professional or referring to detailed video tutorials can be very helpful.
