macbook air lcd screen replacement

for diy read further here

http://www.applefix.co.nz/blog/macbook-air-lcd-screen-replacement/

iphone 6s no backlight after screen replacement

We receiving lot of iphone 6s no backlight after screen replacement problem. Even though we wrote a blog few months ago on the same iphoe6s backlight problem but some of the iphone 6s we received the technicians tried to replace the same fuse which we have shown in our previous blog. Which was fl4221  some of the technicians made it worse than a normal repair by pulling the pads. Just to aware technicians out iphone 6s back light has around 10 filter or fuse and they all located at different places. For example see the picture below another iphone 6s which was not fl4212 but fl4221 which is 120 OHM 210MA.

read further here http://www.applefix.co.nz/blog/iphone-6s-no-backlight-after-screen-replacement/

iPhone charging port repair hamilton

One of most common iPhone repair is iPhone charging port repair . Comparing iPhone charging port problems with other leading brand like samsung iPhone has achieved charging port reliability much lasting and ease of use than any other brand of phones. They way iPhone charging port is design it is less likely it will break but you might find the charger pin is not going all the way in and doesn’t not come in contact with the charging pins inside and won’t charge. if you are having this problem most probably there is dust accumulated inside. To remove any dust stuck inside we use a dental tool which is sharp half rounded easy to clean iPhone charging port. see in the below picture.

To have precise clean charging port repair we use a dental tool as in the above picture. But sometimes just the cleaning is not enough. Iphone charging connecters inside the port which come in contact with charger port might be rusted or has dust accumulated. You can spot a electronic cleaning foam bottle in the picture which we find is best to clean any electronic component. After removing dust put a little bit of foam on the iPhone charging port and leave it for few minutes then clean it with ESD safe brush.

how to remove iPhone charging port

if iPhone charging port does not work after cleaning then it is time to replace. The difficulty level on iPhone charging port repair or replacement is 5 out of 10. Tools you need for diy iPhone charging port repair are, P2 Pentalobe Screwdriver, phillips #000 screwdriver, metal Uspudger, tweezer, heat gun and new charging port. If you don’t have iPhone  holder work tool as in the above picture. we highly recommend to remove lcd aswell before you start removing iphone charging port cable. read further here  or bring it to applefix hamilton at 85/a victoria street hamilton new zealand or send us a query for a free quote or call 078394188

iphone battery replacement hamilton

if battery on your iphone does not last long most probably you need new battery. bring it to applefix hamilton at 85/a victoria street hamilton or call 078394188 for a free quote  if you want to replace iphone battery yourself read further here

http://www.applefix.co.nz/blog/iphone-battery-replacement-hamilton/

iPhone 6 no display after screen replacement

To protect having problem iPhone 6 no display after screen replacement you must use ESD safe tools and ESD safe working mat to avoid any electric discharge while replacing any iPhone lcd repair. Before taking out broken lcd turn off iPhone completely if possible. The first thing you will be doing is disconnect the battery connectors. But sometimes the technicians even after replacing lot of iPhone lcd can end up having no display and they could not figure out what went wrong and how to get display again. We recieved iPhone 6 from another repair shop which they had no idea why there is no display after replacing the lcd. We checked the iPhone and find out something went wrong with iPhone 6 backlight circuit.

iPhone 6 backlight circuit components

iPhone 6 backlight circuit consists of capacitors, resistors, diode, filters and backlight ic. Diagnosing the whole circuit to find where the fault is requires schematic diagram reading ability and how to test the components on the board or circuit. we usually start with locating the filter or fuse. As filter is first component on the line to blow to save whole circuit to blow. There are around 8 filters on backlight circuit on iPhone 6. We quickly find out one of the fuse is is missing. May be the technician snipped it off.

read further here

http://www.applefix.co.nz/blog/iphone-6-no-display-after-screen-replacement/

macbook pro lcd backlight repair hamilton new zealand

professional macbook repair in hamilton waikato new zealand. any problem with your macbook bring it to applefix hamilton at 85/a victoria street hamilton or call 078394188 macbook pro lcd backlight repair all repairs in store http://www.applefix.co.nz/blog/macbook-pro-lcd-backlight-repair/

ipod nano screen and power button repair hamilton

 most common problem we fixing on ipod nano is power button issue. after sometime you might find your ipod nano power button stuck or stops working. or if ipod nano screen is broken bring it to applefix hamilton at 85/a victoria street hamilton or call 078394188 for a free quote

if you doing it yourself read further here

http://www.applefix.co.nz/blog/ipod-nano-screen-and-power-button-repair/