iPhone x ear speaker and face id repair in hamilton new zealand

iphone x ear speaker and face id repair in hamilton New Zealand

watch full video here 

Professional iphone ear speaker and face id repair at AppleFix hamilton New Zealand at 125 ward street Hamilton. If you having low volume in ear speaker on your iPhone x you might lose face id if it is not fixed professionally.

Question is why replacing the ear speaker full flex cable will in any way fail the face id because face id is not in speaker? The whole functional area is dubbed the “TrueDepth camera system”, which is made up of flood illuminator, infrared camera, front camera, dot projector, proximity sensor, ambient light sensor, speaker and microphone.

So for iPhone x ear speaker and face id repair if you replacing full speaker assembly with new proximity sensor and ambient light sensor the face id will not work because true death camera system is made-up of proximity sensor, ambient light sensor. So you have to replace just the speaker.

will you lose face id if you replacing iPhone x ear piece full assembly?

Yes you will so just replace the ear speaker.

How face id works on iPhone x?

Every time you glance at your iPhone X, the flood illuminator detects your face with infrared light and forms an image. Then the dot projector will project out over 30,000 invisible infrared dots over your face to create a 3D map. Last, the infrared camera reads this map and sends the data to neural networks to create a mathematical model of your face. Your iPhone X will check that mathematical model against the one that you’ve set up and stored on your device to see if it’s a match, and if it is, it will unlock your phone. Read another good article here

For any iPhone x repairs in hamilton new zealand call us 078394188 or visit our store 125 ward street hamilton 3204 New Zealand or send us a query through our website .

If you don’t live in new zealand find instruction here to mail your device

how to separate iphone x pcb board easily | AppleFix Hamilton New Zealand |

watch full video at below link

https://www.applefix.co.nz/blog/how-to-separate-iphone-x-pcb-board/

how to seperate iphone x pc board easily.. AppleleFix hamilton New Zealand

iphone x board is designed is unique. how to separate phone x pcb board easily is a challenge for iphone x repair. We are doing iphone x repairs successfully and separating the two layers pcb board is quite easy for us. So i thought i should make a video for other repairers.

Using a good quality iphone x pcb board separator machine is essential. You will see many on the internet but only few work fine.

St the temperature of iphone x pcb board separator machine to 280 and before you start the machine put the board in. Rest of the process you can watch in the video above.

Any iphone x board repair call us 078394188 or send s query here

If you dont live in hamilton you can send your device read instruction here

Or visit our store at 125 ward street hamilton 3204 New Zealand

iPhone 6 plus touch ic repair AppleFix Hamilton New Zealand

Watch complete video of iPhone 6 plus touch ic repair at applefix lab in hamilton at 125 ward street hamilton New Zealand. Learn iPhone logic board repair courses from professionals. Read full info of the course  https://applefix.co.nz/logicboard-repair-course/

Whatever problem you having on your iPhone bring it to applefix hamilton if you don’t live in hamilton send your device read instructions https://applefix.co.nz/send-your-device/Call 078394188 for free quote

macbook air a1466 backlight fuse and lcd connectors repair @ applefix hamilton new zealand

Professional macbook repair in hamilton new zealand. This macbook air a1466 baclight fuse and lcd connectors repait done at applefix hamilton. The logic board of the macbook was liquid damaged and after some repair attempts at other macbook repair shops it was sent to us. Full backlight circuit was blown including lcd connectors. i have already wrote a blog on macbook backlight ic repair which you can read here.

On this macbook first we tested backlight ic whcih was faluty and it was replaced but even after replacing the back light ic still no image. i checked the lcd lvds connectors and find that both backlight lines are burnt on lcd connectors and one of the backlight line pad is ripped / burnt.

Even-though i could have jump wired burnt connectors to existing lcd connectors but because of the extreme liquid damage i decided to replace the macbook air lcd connectors.

In this kind of repair it is very important to have knowledge of how to read schematic diagram. Specially when some of the pads are burnt on pcb board. Without not having the knowledge of where these lines are leading to it is almost impossible to do a successful repair.

To check your macbook backlight problem you can read good article here.

macbook air a1466 backlight fuse and lcd connectors repair at applefix hamilton

If you are reading this article to have some knowledge it is important to know that water or liquid damage electronics will not work just by cleaning because if there is a short on the board it cant be removed by cleaning. Cleaning is important but after you finished examining the board. The solution we use for ultrasonic clean are military grade and will will leave any traces of liquid damage after cleaning and it will be hard to find damaged area. For example see in the below picture we can see where the damageIf your macbook or any other electronic is liquid damaged. Do not turn on do not charge you will make it worse. Rice remedy and hot cupboard treatment never worked. Having moisture or any liquid inside or on the logicboard will create conductivity and flow of the current throu this conductivity will burn the small components on logic board.

macbook air a1466 back light fuse and lcd connectors repair at apple fix...

professional iMac repairs in hamilton new zealand at applefix hamilton

professional iMac repairs in hamilton new zealand

Applefix hamilton are professional iMac repairs in hamilton new zealand from a simple iMac repairs like iMac hard drive or ram upgrades to complicated dead iMac repairs, or iMac logic board repairs applefix hamilton has professional iMac repair lab. The iMac we writing this blog came dead. iMac No startup chime, iMac no display just dead.

The first part to check om iMac when it is completely dead is power supply. Older iMac screen glass is attached with metal frame with magnetic clips and very easy to remove. Newer iMac scene are hard glued with metal frame and easy to break while removing or if you are not using right tools. The best tool we recommend to remove iMac retina screen is in the picture below.

You have to heat the edges of the screen and start sliding / running the above tool and it will cut through the adhesive safely.

First thing to do now is a visual inspection of the components of logic board. We could not find any burnt components the board look like new. Next part we checked is power supply attached power cable pushed power button and checked the power lines going to logic board with multimeter and there was no voltage.

We removed the power supply unit from the iMac and from visual inspection there were burnt components on the iMac power supply. This came out an easy repair.

professional iMac repairs in hamilton new zealand at applefix

AppleFix hamilton at 125 ward street are professional iMac repairs in hamilton new zealand any problem with your iMac hardware or software bring it for a fast iMac repair turn around and most economical iMac repair price.

Anyways we replaced the power supply and iMac got life again and it turns on normally.

call 078394188.i