ipad Air NOT charging | U2 Tristar 1610A3 charging ic replacement | ipad repair Hamilton NZ AppleFix

 

ipad air chrging port was replaced but still not charging, tested charging ic 1610a3 was faulty replaced and it charging fine Skill development Job Oriented short Training course. In Latest Gadgets, Smart Mobile Phones, Tablets, Laptops, Desktops, gaming gadget, Playstation, Xbox Repair Technology. This course is aimed / focused, to teach you to fix most common repairs an electronics repair shop could face in a practical working environment. Start your own business or increase your chances to get job quickly. read info here https://applefix.co.nz/logicboard-repair-course Mail in device read info here https://applefix.co.nz/send-your-device We specialize in logic board and liquid damage repair and can fix your Laptop, MacBook, mobile phone , ipad, iphone , tablet , playstation, xbox or any other electronic gadget that has been deemed unfixable by another repair shop. *Have a repair shop and are looking to outsource logic board repairs? We offer discounted repairs to other repair shops, schools, large organizations and government agencies. — https://applefix.co.nz/contact/ logicboard repair course in New Zealand Skill development Job Oriented short Training course. In Latest Gadgets, Smart Mobile Phones, Tablets, Laptops, Desktops, gaming gadget, Playstation, Xbox Repair Technology. This course is aimed / focused, to teach you to fix most common repairs an electronics repair shop could face in a practical working environment. Start your own business or increase your chances to get job

 

Replacing the charging IC (Integrated Circuit) on an iPad Air involves intricate soldering work and should be done with caution. If you're not experienced with microsoldering or electronics repair, it's recommended to seek professional assistance, as attempting these repairs without proper expertise can lead to further damage. Here's a general guide for informational purposes only:

Note: This information is for educational purposes, and I am not responsible for any damage that may occur during the repair process. Proceed at your own risk.

Tools and Materials Needed:

1. Replacement charging IC compatible with iPad Air.
2. Microsoldering iron with fine tips.
3. Hot air rework station.
4. Soldering flux.
5. Solder wick or desoldering braid.
6. Tweezers.
7. Magnifying glass or microscope for precision work.
8. Isopropyl alcohol and a brush.
9. ESD-safe workplace and wrist strap.

Procedure:

1. Prepare Your Workspace:
• Ensure you're working in an electrostatic discharge (ESD)-safe environment to prevent damage to electronic components.
2. Disconnect Power:
• Power off the iPad and disconnect it from any power source.
3. Disassemble the iPad:
• Follow a disassembly guide specific to your iPad Air model to expose the logic board.
4. Locate the Charging IC:
• Identify the charging IC on the logic board. It is typically located near the charging port.
5. Apply Soldering Flux:
• Apply soldering flux to the charging IC and the surrounding components. This helps in soldering and desoldering.
6. Desolder the Old Charging IC:
• Use the hot air rework station and microsoldering iron to carefully desolder the old charging IC. Use solder wick to clean up any remaining solder.
7. Clean the Area:
• Clean the area around the charging IC with isopropyl alcohol and a brush.
8. Place the New Charging IC:
• Carefully place the new charging IC in the correct orientation. Ensure proper alignment.
9. Solder the New Charging IC:
• Use the hot air rework station and microsoldering iron to solder the new charging IC onto the logic board. Be precise to avoid damage to nearby components.
10. Inspect Your Work:
• Inspect the solder joints under a magnifying glass or microscope to ensure they are clean and free of defects.
11. Reassemble the iPad:
• Put the iPad back together in the reverse order of disassembly.
12. Test the Charging Functionality:
• Connect the iPad to a power source and check if it charges properly.

If you are not confident in your microsoldering skills or if the issue persists after the replacement, it's advisable to seek assistance from a professional technician or a reputable repair service. Microsoldering requires precision, and any mistakes could lead to further damage.

 

Macbook pro not turning on A1708 820-00875 shorted 1.8 Volt Line on CD3215B03 | Macbook repair NZ

 

macbook pro A1708 board number 820-00875 moisture damaged | type C power managed IC u3100 CD3215B03 replacement. macbook repair experts in hamilton new zealand applfix call 078394111 visit 125 ward street hamilton new zealand Replacing the USB-C power IC (Integrated Circuit) on a MacBook A1708 involves delicate soldering work and should only be attempted by individuals with experience in electronics repair and soldering. If you're not comfortable with these skills, it's strongly recommended to seek professional assistance. Additionally, performing unauthorized repairs may void any existing warranties. Here's a general guide for informational purposes only. Note that this information is not a step-by-step guide, and specifics can vary based on the nature of the repair and the MacBook model: Tools and Materials Needed: Replacement USB-C power IC compatible with MacBook A1708. Soldering iron with a fine tip. Desoldering wick or solder sucker. Solder. Flux. Precision screwdrivers. ESD-safe workplace and wrist strap. Magnifying glass or microscope for precision work. Procedure: Prepare Your Workspace: Ensure you're working in an electrostatic discharge (ESD)-safe environment to prevent damage to electronic components. Disconnect Power: Power off the MacBook and disconnect it from any power source. Disassemble the MacBook: Follow a disassembly guide specific to the MacBook A1708 model to expose the logic board. Locate the USB-C Power IC: Identify the USB-C power IC on the logic board. It's often located near the USB-C port. Apply Flux: Apply soldering flux to the USB-C power IC and the surrounding components. Desolder the Old IC: Use a soldering iron and desoldering wick or solder sucker to carefully remove the solder from the USB-C power IC's connections on the logic board. Remove the Old IC: Gently lift and remove the old USB-C power IC from the logic board. Be careful not to damage nearby components. Clean the Pads: Clean the solder pads on the logic board using isopropyl alcohol and a brush. Prepare the Replacement IC: Align the replacement USB-C power IC with the solder pads on the logic board and prepare to solder it in place. Solder the New IC: Use the soldering iron to solder the replacement USB-C power IC onto the logic board. Be precise and avoid creating solder bridges between connections. Inspect Your Work: Inspect the solder joints under magnification to ensure they are clean and free of defects. Reassemble the MacBook: Put the MacBook back together in the reverse order of disassembly. Test the USB-C Port: Connect the MacBook to a power source and test the USB-C port to ensure that the replacement IC is functioning correctly. If you are not confident in your soldering skills or if you encounter difficulties during the process, it's strongly recommended to seek professional help. Applefix new zeland are expert in macbook repairs in hamilton new zealand call us on 078394111 or visit 125 ward street hamilton new zealand